Operators in factories are frequently required to operate in air conditions that are unhealthy for prolonged exposure. For this reason, breathing air systems must be put in place. The air used for inhalation in workplaces like factories and labs must be up to par.
How much do you know about selecting and installing a complete plant breathing-air system? The following recommendations offer the knowledge and tools essential for making these life-or-death choices about health and safety.
Commonly Found in Contaminated Compressed Air
Carbon Monoxide
Compressed air contains high levels of harmful contaminants, but carbon monoxide is by far the worst. It’s either taken into the system via the air intake or created internally by overheated piston compressors. Air intakes are required to be located some distance from any potential sources of carbon monoxide, such as vehicle tailpipes.
Water Vapor
Dampness from the air is sucked into the compressor and distributed throughout the airflow as a vapor. The vapor condenses in the mask or helmet when the compressed air cools while moving through the system. Sludge, a combination of water, oil, and solid pollutants, may block pipes and ruin other parts of a system. In addition to causing corrosion in pipes, water freezing during cold spells can obstruct ventilation.
Particles
The air intake is often the point of entry for solids. On the other hand, the compressor might potentially introduce new materials. Compressors with no lubrication system employ teflon, carbon, and other materials as lubricants. The frictional wear of these materials might release particles into the air.
The Inner Workings of Breathable Air
Breathing air is always of the same quality (Grade D) because air is constantly pumped through the respirator to stop leaks and keep outside pollutants from getting in.
Air is only delivered to the respirator when the user inhales, or “demands” it. The rate of air delivery is automatically modified to match the user’s respiration. Most of the time, this system is made up of compressed air cylinders or an online compressor because it is only used for short periods of time.
Which Breathing Air System Is Best?
The Aircel BHD Series (50-600 scfm) is a great way to cut down on the risks of breathing in dangerous air at work. Quality breathing air delivered to air respirators, hoods, and masks require more than just a compressor to ensure worker safety.
The Aircel BHD Series (50-600 scfm) gives you clean, compressed air that is not affected by the outside world. Aircel is committed to raising the bar for all other compressed air service providers so that it can stay at the top of its field.
If you are looking for a great quality compressed air solution for your company, Air & Vacuum Process is the place to go. They have been in business since 1997 and have since provided compressed air and natural gas dehydration solutions to clients all over the world. You may reach them at any time of day or night by dialing 866-660-0208.
